Dog Anti Bark Collar Waterproof With Beeps And Vibration Electric Shock Anti Barking No Bark Training Collar Chargeable
Product introduction ♦Power button: After pressing it twice in a row, it will display the power level, which is divided into 0-5 levels, and level 5 means the battery is fully charged. ♦ Electric shock button: It is divided into four levels: A, B, C, and 0. Level C means the strongest electric shock and then decreases in turn, and level 0 means no electric shock. ♦ Sensitivity buttons: There are four levels of A, B, C, and D. A is the low sensitivity level; D is the highest sensitivity level. Press the S key (sensitivity key) for 3 seconds to turn on the flashing function of the lights on both sides of the product, which is convenient for walking the dog at night. Press the S key again for 3 seconds to turn off the flashing function. ♦ Product weight: 70g ♦ Collar diameter adjustment range: 4cm-22cm
♦ Product volume8.5cm * 6.5cm * 6cm
anti bark collar parameter 1, button function: three buttons, power button, discharge intensity adjustment button, sensitivity adjustment button 2, working voltage: 4.2V (rechargeable lithium battery) 3, working current: bright screen 15mA, buzzer work 200mA, motor work 150mA, discharge work 250mA 4, discharge gear working current: 0 gear 0mA, A gear 20mA, B gear 100mA, C gear 200mA 5. Sensitivity gear position: 400 files for A file, 250MS for B file, 100MS for C file, and 15MS for D file 6, static standby current: less than 0.1mA 7, shutdown current: less than 0.001mA
Instructions 1. Power-on button: short press to power on, dynamically display the product model, buzzer sounds; long press for 5 seconds to turn off, buzzer sounds twice; press twice to display battery power. 2, discharge intensity adjustment button: short press adjustment intensity (0, A, B, C), press the first jump to display the current gear position, cycle mode 3. Sensitivity adjustment button: short press to adjust the sensitivity (A, B, C, D), press to jump one file, display the current gear position, cycle mode; long Press for 3 seconds to turn on the breathing light and press and hold for 3 seconds to turn off the breathing light. 4, charger voltage: 5V 500mA.
How the product works 1. This product uses sensors to distinguish sensitivity. When the dog barks, it triggers the sensor, which triggers the set function. The bark stopper will beep first, then vibrate, and finally shock (depending on settings). 2. Automatic protection mode 3. If the bark stopper works continuously for 7 times in one minute, it will enter the automatic protection mode, and the display will show "E". After one minute, the product will re-enter working mode. When in auto protection mode, pressing any button will put the product back into working mode. 4. Low battery warning 5. When the battery of the bark stopper is lower than 20%, the display will keep flashing "1". Please charge it in time. After each charge, the bark stopper should be turned on again. 6. The battery capacity of this product is (250mAh) when fully charged, it can last 15-20 days.