Good helper for you to control the time of household appliances, making your life much easier.
With this digital programmable timer which has 3 plug sockets, You can control your fish tank aquarium lighting system, heater, cooler, filter ,water pump, wave maker, dosing pump , Or other household appliances requires regular opening and closing.
Specification:
Model: 3 in 1 Digital Timer Socket For Aquarium Household Appliances
Size: About 18x11x5cm
Socket Style: We will send the socket jacks of style A or style B, depending on our stock and your country plug standard.
AC Input Range: 160V ~ 240V,50Hz
Maximum Load: 2500W, 16A
Minimum time setting: 1 minute
Max setting time: 168 hours (7 days)
Accuracy: 0.3 seconds
Package includes:
1X Programmable Digital Timer Socket
1 x Plug adapter for local use (US/EU/AU/UK standard adapter, please leave a message to us )
Feature:
1, Programs both weekly or hourly for full control over your aquarium lights , wave makers and dosing pump.
2, 3 plug sockets ,Individual Control.
3, UP to 15 ON and OFF switches a day.
4, Minimum of 1 minute setting.
Operating instructions:
1, Setting the time:
Press and hold the CLOCK key. With CLOCK key held pressed, the WEEK key can be used to select the correct day (), the HOUR key to select the correct hour and the MIN key to select the correct minutes.
2, Programming of switching timers:
(1) Press the PROG key once to set the first on time- you will see "1 ON" appear on the left of the LCD display. This indicates that you can now enter the first ON timer. Press the WEEK button to choose the required day or block of days (Cycles from Monday to Sunday for seven days, Monday to Friday for five days, Saturday to Sunday for two days, or one day of the week), and the set the hour and minutes using the HOUR and MIN buttons.
(2) Press the CH1-3 button; let the arrow ▶ on the right of LCD display point to CH1, CH2 OR CH3, to choose the required plug.
(3) Press the PROG button to validate the entry and move onto the first OFF time- you will see "1 OFF" appears on the left of the LCD display. This indicates that you can now enter the first off time by using the Date of WEEK, HOUR and MIN buttons as above. Press the PROG button to validate this entry.
(4) Continue to press the "PROG" button, and "2 ON, 2 OFF, 3 ON, 3 OFF, ..., 15 ON, 15 OFF" will be displayed in the lower left of the display. Refer to steps (1), (2), and (3) to set the switches time.
(5) When you have set the required ON/OFF settings, press the CLOCK button to return the display to the clock. The timer will now be ready to operate. You can check the settings you have programmed by pressing the PROG button repeatedly- each setting will appear on the screen.
3, Manual override:
You can choose permanent manual ON, permanent Manual OFF and AUTO by pressing the ON/OFF Button. Each mode will be displayed on the screen. The programmed settings only work on the AUTO mode.
4, Reset Button
To reset the unit, both the time and programmed ON/OFF settings, Press the RESET button.
[xlmodel]-[photo]-[0000]
[xlmodel]-[products]-[41582]
[xlmodel]-[custom]-[41370]
About Payment
1. We accept Alipay, VISA, Mastercard, Western Union, Qiwi and Bank Transfer. All the payment are accepted through security payment processor ESCROW.
2. Payment must be made within 3 days of order.
3. If you can't checkout immediately after auction close, please wait for a few minutes and retry.
4. The buyer is responsible for any tax or duty charged by their country. Due to Customs Clearance additional cost or delay may occur during international trade. We sincerely hope you kindly do not take the additional custom cost or customs clearance as a reason for refund requirement or negative feedback.
About Shipment
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO address)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your shipping address.
4. Service Transit Time is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
5. If you have not received your parcel within 60 days (Brazil 90 days) from payment, please contact us. We will reply to you as soon as possible.
Return or Refund
1. If the item is defective, please contact us within 7 days. Do not open dispute without any communication.
2. High requirements on the color or other feature buyers please know. The images may not show the actual item and are for your reference only. All the goods' size is manual measurement, so there is 1-50px error sometimes.
3. If you are not satisfied when you receive your item, please contact us timely and return it within 15 days for a replacement or money back.
4. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
5. Return shipping cost is paid by the buyer (Except the defective item).
Feedback
1. If you are satisfied with our service, please leave us a positive feedback and a "POSITIVE 5 STARS" rating. Your support is our greatest motivation.
2. If you are not satisfied with the item, please contact us before you leave the negative feedback,and we will give you a satisfactory solution.
3. We maintain high standards of excellence and strive for 100% customer satisfaction. If you have any question ,pls feel free to contact us on TradeManager or email.
Specifications
Brand Name:
MEANGOOD
Origin:
CN(Origin)
Model Number:
SKU498
Type:
Fish
Power:
500 W
Is Smart Device:
NO
Voltage:
110-240V
Plug Type:
US Plug,EU Plug,AU Plug
Temperature Range:
16-32 °C
AC Input:
160V ~ 240V, 50Hz
Type1:
3 In 1 Programmable Digital Timer Socket
Type2:
Time Control Of Household Appliance
Suit For:
Aquarium Lighting ,Heater, Water Pump, Dosing Pump